Datalogic Scanning 8500 Scale Motion Level Filter

Scale Motion Level Filter

In environments where checkstands generate excessive vibration, the scale can be set to filter a certain amount of the motion with regard to its oper- ation.

This filter is generally used only in applications where scale error E_1 (too much motion at power-up) has occurred.

NOTE

To set this feature:

1.Scan the SWITCH bar code.

2.Scan your selection from the bar codes below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan. The strat- egy is to select the lowest possible filter level needed that allows normal scale operation.

3.Complete the programming sequence by scanning the SWITCH bar code.

SCALE MOTION LEVEL FILTER = LOW

SCALE MOTION LEVEL FILTER = MEDIUM LOW

6-40 Magellan® 8500 Scanner