Code 39 Length Control

This feature specifies whether variable-length or fixed-length decoding will be set for Code 39.

To set this feature:

1.Scan the SWITCH bar code.

2.Scan your selection from the bar codes below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.

3.Complete the programming sequence by scanning the SWITCH bar code.

 

If variable-length control was selected, you must now set the features

 

Code 39 Maximum Label Length and Code 39 Minimum Label

 

Length. If fixed-length control was selected, you must now set Code

NOTE

39 Fixed Length 1 and Code 39 Fixed Length 2.

 

CODE 39 LENGTH CONTROL = VARIABLE-LENGTH

CODE 39 LENGTH CONTROL = FIXED-LENGTH

6-190

Magellan® 8500 Scanner