Code 39 Check Character Calculation

Enables/disables calculation and verification of an optional Code 39 check character. When disabled, any check character in label is treated as a data character.

If check calculation is disabled, the risk is increased that a misread can occur.

NOTE

To set this feature:

1.Scan the SWITCH bar code.

2.Scan either the enable or disable bar code below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.

3.Complete the programming sequence by scanning the SWITCH bar code.

CODE 39 CHECK CHARACTER CALCULATION = DISABLE

CODE 39 CHECK CHARACTER CALCULATION = ENABLE

Product Reference Guide

6-185