Datalogic Scanning 8500 Standard 2 of 5 Length Control

Standard 2 of 5 Length Control

This feature specifies whether variable-length or fixed-length decoding will be set for Standard 2 of 5.

To set this feature:

1.Scan the SWITCH bar code.

2.Scan your selection from the bar codes below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.

3.Complete the programming sequence by scanning the SWITCH bar code.

	If variable-length control was selected, you must now set the features
	Standard 2 of 5 Maximum Label Length and Standard 2 of 5
	Minimum Label Length. If fixed-length control was selected, you
NOTE	must now set Standard 2 of 5 Fixed Length 1 and Standard 2
	of 5 Fixed Length 2.

STANDARD 2 OF 5 LENGTH CONTROL = VARIABLE-LENGTH

STANDARD 2 OF 5 LENGTH CONTROL = FIXED-LENGTH

6-266 Magellan® 8500 Scanner