Safety precautions to be taken:

No adjustments or alteration of the scanner or scanning-scale housing are to be attempted by the user.

The failure of the facet wheel motor while the unit is continuing to emit a laser beam causes the emission levels to exceed those for inherently safe operation. The unit has safeguards to prevent this occurrence. If, however, a stationary

 

CAUTION

laser beam is ever emitted, the failing unit should be disconnected from its

 

 

 

 

power supply until repaired by a qualified technician.

 

 

 

 

 

 

 

 

This equipment has been tested and found to comply with the limits for a Class

 

 

A digital device, pursuant to part 15 of the FCC Rules. These limits are

 

 

designed to provide reasonable protection against harmful interference when

 

 

the equipment is operated in a commercial environment. This equipment gener-

 

 

ates, uses, and can radiate radio frequency energy and, if not installed and

 

WARNING

used in accordance with the instruction manual, may cause harmful interfer-

 

ence to radio communications. Operation of this equipment in a residential

 

 

area is likely to cause harmful interference in which case the user will be

 

 

required to correct the interference at his or her own expense.

 

 

 

This Class A digital apparatus meets all requirements of the CanadianInterference-Causing Equipment Regulations.Cet appareil numerique de la classe A respecte toute les exigences duReglement sur le material broilleur du Canada.

Product Reference Guide

1-11