Jumpers
Jumpers are small blocks on the system board with two or more pins emerging from them. Plastic plugs containing a wire fit down over the pins, creating a circuit. To change a jumper setting, pull the plug off its pin(s) and carefully fit it down onto the pin(s) indicated.
NOTICE: Make sure your system is turned off and unplugged from the elec- trical outlet before you change a jumper setting. Otherwise, damage to your system or unpredictable results may occur.
Password Jumper
Figure 2-4 shows the location of the password jumper (JP6) in your computer. Table 2-2 describes the settings and functions of the password jumper.
Table 2-2. Password Jumper Settings
Jumper
Settings Description
Enables system password features (default)
Bypasses system password features
NOTE: The Glossary in the system Help defines abbreviations and acronyms.
