Onboard Peripherals Screen
Figure B-6. Onboard Peripherals Screen Menu
Table B-7. Onboard Peripherals Screen Menu Options
Option | Function |
|
|
Serial Port | Configures the serial port. Set this option to Enabled |
| (default) or Disabled. If set to Enabled, you can set the fol- |
| lowing additional options: |
Base Address | Available base I/O addresses are 3F8h (default), 3E8h, 2F8h, |
| and 2E8h. |
IRQ | Available interrupts are 4 (default) and 3. |
|
|
Parallel Port | Configures the parallel port. Set this option to Enabled |
| (default) or Disabled. Depending on the port setting, you can |
| set the following additional options: |
Base Address | If port is set to Enabled, available base I/O addresses are |
| 378h (default) and 278h. |
|
|
NOTE: The Glossary in the system Help defines abbreviations and acronyms.
support.dell.com | System Setup Program |