IDE Primary Channel Master Submenu
Figure B-5. IDE Primary Channel Master Submenu
Table B-6. IDE Primary Channel Master Submenu Options
Option | Function |
|
|
Device Detection | Specifies the mode of device detection on the channel. |
Mode | Selections are Auto (default), User, and None. |
|
|
Device Type | Displays the device type as Hard Disk, |
|
|
|
|
Cylinder | If you set Device Detection Mode to User, you can enter the |
| number of cylinders from 0 to 16383. |
|
|
Head | If you set Device Detection Mode to User, you can enter the |
| number of heads from 0 to 16. |
|
|
Sector | If you set Device Detection Mode to User, you can enter the |
| number of sectors from 0 to 63. |
|
|
Size | Displays the size of the drive. |
|
|
Hard Disk 32 Bit | Set to Enabled (default) to enhance the |
Access | |
|
|
Advanced PIO | Sets the PIO mode to Auto (default), Mode 0, Mode 1, |
Mode | Mode 2, Mode 3, or Mode 4. Set to Auto to optimize the hard- |
| disk drive timing. |
|
|
DMA Transfer | Sets the DMA transfer mode to Auto (default), Multiword 0, |
Mode | Multiword 1, Multiword 2, Ultra Mode 0, Ultra Mode 1, |
| Ultra Mode 2, Ultra Mode 3, Ultra Mode 4, or Disabled. |
|
|
NOTE: The Glossary in the system Help defines abbreviations and acronyms.