7Connect front panel cables to the fan controller board. See Figure 5-12.

You must route these cables properly through the tabs on the chassis to prevent them from being pinched or crimped.

8Connect all the cables to the backplane. See Figure 5-3 for 3.5-inch hard drives and Figure 5-6 for 2.5-inch hard drives.

You must route these cables properly through the tabs on the chassis to prevent them from being pinched or crimped.

9Close the system. See "Closing the System" on page 92.

10Replace the hard drives. See "Installing a Hard Drive Into a Hard-Drive Carrier" on page 58.

11Reconnect the system to its electrical outlet and turn on the system, including any attached peripherals.

112

Installing System Components

Page 112
Image 112
Dell C6100 owner manual Installing System Components