
Option | Description |
|
|
Redirection After BIOS POST | Selects the settings for the redirection. This item |
(Always default) | disappears when Remote Access is disabled: |
| • Disabled: turns off the redirection after POST. |
| • Boot Loader: redirection is active during POST and |
| boot loader. |
| • Always: redirection is always active. (Some |
| operating systems may not work if set to Always) |
|
|
Terminal Type | Selects the target terminal type. This item disappears |
(VT100 default) | when Remote Access is disabled. |
|
|
Enables or disables | |
Support (Enabled default) | support for ANSI/VT100 terminals. This item |
| disappears when Remote Access is disabled. |
|
|
Terminal Display Mode | Selects Terminal Display Mode. |
(Normal mode default) | Options: |
| |
| • Normal Mode |
| • Recorder Mode |
|
|
NOTE: When Flow Control is set to Software, the Hyper Terminal on remote side is discontinued by pressing <Ctrl><S>. But the <Ctrl><S> is also the Setup Key Stroke for setting onboard NIC PXE Option ROM Configuration. Therefore, we suggest users change <Ctrl><S> to <Ctrl><B> in PXE OPROM Configuration in order to avoid that the Hyper Terminal on remote side is discontinued when pressing <Ctrl><S>.
IPMI Configuration
Option | Description |
|
|
Status Of BMC | Displays BMC status. |
|
|
BMC Firmware Revision | Displays BMC Firmware Revision. |
|
|
View BMC System | Selecting this option and pressing Enter, displays: |
Event Log | Total Number Of Entries, SEL Entry Number, |
| SEL Record ID, SEL Record Type, |
| Event Time Stamp, Generator ID, Event Message |
| Format Version, Event Sensor Type, Event Sensor |
| Number, Event Dir Type, and Event Data. |
Using the System Setup Program
49