
7Connect the hard drive and power cables to the system board.
8If applicable, install the SAS mezzanine card or the Infniband mezzanine card. See "Installing the SAS Mezzanine Card" on page 75 or "Installing the Infiniband Mezzanine Card" on page 77.
9Install the
10Replace the
11Reconnect the system to its electrical outlet and turn on the system, including any attached peripherals.
Opening and Closing the System
WARNING: Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the system by yourself.
CAUTION: This system must be operated with the system cover installed to ensure proper cooling.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
Opening the System
1Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
2Remove the securing screw from the system cover. See Figure
3Press the cover release latch lock. See Figure
4Grasp cover on both the sides with your palm on the traction pad, slide out and lift the cover away from the system. See Figure
Installing System Components
91