Dell C6100 owner manual Installing a System Board, Removing and Installing System Board Screw

Figure 3-21. Removing and Installing System Board

1

3

		2
1	screw (8)	2	system board
3	system-board assembly

Installing a System Board

1Unpack the new system board.

2Holding the system board by the edges, slide the system board into the system-board assembly.

3Replace the eight screws to secure the system board to the system-board assembly.

4Transfer the processors to the new system board. See "Removing a Processor" on page 66 and "Installing a Processor" on page 68.

5Remove the memory modules and transfer them to the same locations on the new board. See "Interposer Extenders" on page 82 and "Installing Memory Modules" on page 80.

6Replace the cooling shroud, see "Installing the Cooling Shroud" on page 64.

90

Installing System Components