Option | Description |
|
|
USB 2.0 Controller Mode | Configures the USB 2.0 controller in HiSpeed |
(HiSpeed default) | (480 Mbps) or FullSpeed (12 Mbps). |
|
|
BIOS EHCI | This is a work around for operating systems without |
(Enabled default) | EHCI handoff support. The EHCI ownership change |
| should be claimed by EHCI driver. |
|
|
USB Mass Storage Reset | The number of seconds that the POST waits for the |
Delay (20 sec default) | USB mass storage device after the start Unit |
| command is issued. |
|
|
Device# | USB device model name |
|
|
Emulation Type | If Auto, USB devices, which are less than 530 MB are |
(Auto default) | emulated as floppy and others are be emulated as |
| hard disk. Forced FDD option can be used to force a |
| formatted hard drive to boot as FDD (e.g. ZIP drive) |
|
|
PCI Configuration
OptionDescription
NIC Function Support (PXE NIC Function Disable or PXE/iSCSI Support default)
NIC1 Option ROM (Enable Set OnBoard 82576EB Disable/Enable Option ROM default)
NIC2 Option ROM (Enable Set OnBoard 82576EB Disable/Enable Option ROM default)
44
Using the System Setup Program
