Option | Description |
|
|
Async DMA | Indicates whether Async DMA is supported. |
|
|
Ultra DMA | Indicates whether Ultra DMA is supported. |
|
|
S.M.A.R.T. | Indicates whether S.M.A.R.T. mode is supported. |
|
|
Type (Auto default) | Selects which type of device is installed or select |
| Auto to enable the system to automatically configure |
| the device: |
| • Not Installed |
| • Auto: Auto detected |
| • CD/DVD: ATAPI CD/DVD detected |
| • ARMD: ATAPI removable media device detected |
|
|
LAB/LARGE Mode (Auto | Enables LAB access mode: |
default) | • Disabled: LAB access mode is disabled. |
| |
| • Auto: Enables LAB Mode if the device supports |
| it and the device is not already formatted with |
| LAB mode disabled. |
|
|
Block | Enables |
(Auto default) | • Disabled: data transfer from and to the device |
| |
| occurs one sector at a time |
| • Auto: data transfer from and to the device occurs |
| multiple sectors at a time if supported by the device |
|
|
PIO Mode (Auto default) | Selects the device PIO (Programmed Input/Output) |
| mode, which determines the data transfer mode used |
| by IDE drives. PIO mode uses the processor's |
| registers for data transfer: |
| • Auto: automatically detects optimal or |
| default PIO mode |
| • 0 ~ 4: select PIO mode 0 to 4 |
42
Using the System Setup Program
