5Press down and out on the ejectors on each end of the socket until the memory module pops out of the socket. See Figure
Handle each memory module only on either card edge, making sure not to touch the middle of the memory module.
6Replace the cooling shroud. See "Installing the Cooling Shroud" on page 64.
7Replace the
Reconnect the system to the electrical outlet and turn the system on, including any attached peripherals.
Installing Memory Modules
WARNING: The memory modules are hot to the touch for some time after the system has been powered down. Allow time for the memory modules to cool before handling them. Handle the memory modules by the card edges and avoid touching the components on the memory module.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
1Turn off the system, including any attached peripherals, and disconnect the system from its electrical outlet.
2Remove the
3Remove the cooling shroud. See "Removing the Cooling Shroud" on page 63.
4Locate the memory module sockets. See Figure
5Press the ejectors on the memory module socket down and out, as shown in Figure
6Handle each memory module only on either card edge, making sure not to touch the middle of the memory module.
80
Installing System Components
