Installing a Power Distribution Board

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

CAUTION: If removed, you must replace the second power distribution board at the bottom and the power distribution board-connector before replacing the first power distribution board at the top.

1If removed, first place the second power distribution board in the system. See Figure 3-24. Otherwise skip to step 5.

NOTE: To install the second power distribution board that is below the first power distribution board, angle the board during installation.

2Replace the screws securing the second power distribution board to the system. See Figure 3-24.

3Replace the power distribution board-connector. See Figure 3-24.

4Connect all the cables to the second power distribution board. See Figure 5-13.

You must route these cables properly through the tabs on the chassis to prevent them from being pinched or crimped.

5Replace the screws securing the first power distribution board to the system. See Figure 3-24.

6Connect all the cables to the first power distribution board. See Figure 5-13.

You must route these cables properly through the tabs on the chassis to prevent them from being pinched or crimped.

96

Installing System Components

Page 96
Image 96
Dell C6100 owner manual Installing a Power Distribution Board