62 Installing System Components
Figure 3-6. Removing and Installing the System-Board Assembly
Installing a System-Board Assembly
CAUTION: Many repairs may only be done by a certified service technician.
Youshould only perform troubleshooting and simple repairs as authorized in
yourproduct documentation, or as directed by the online or telephone service
andsupport team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
withthe product.
1
Slide the system-board assembly into the chassis until it snaps into place.
See Figure3-6.
2
Reconnect all the external cables to the system board
3
Replace the screw that secures the retaining latch. See Figure3-6.
4
Reconnect the system to its electrical outlet and turn on the system,
including any attached peripherals.
1 retaining latch 2 screw
3 handle 4 system-board assembly
3
2
1
4
book.book Page 62 Thursday, March 4, 2010 4:38 PM