Extron electronic 68-1383-01 REV. E manual Example 6 Saving a preset, Preset Assigned

Example 6: Saving a preset

In the following an example, the current configuration is saved as a preset. The example shows the front panel indications that result from your actions.

1.Clear all selections: Press and release the Esc button.

2.Select Save Preset mode: Press and hold the Preset button for approximately 2 seconds until it blinks.

Preset Assigned

Press and hold the Preset button until it blinks.

PRESET		PRESET
	2 seconds	All input buttons with assigned
		presets light red.

If you then save the configuration to a lit preset number, the configuration data at that preset location will be overwritten.

1	2	3	15 16	I
				N
				P
				U
17	18	19	31 32	ST

No Preset Assigned

3.Select the preset: Press and release the input button or output button for the desired preset.

Press the button.

•The button blinks to indicate that this preset number is selected but not saved.

1	2	3	4	5	6	7	8	15 16	I
									N
									P
									U
17	18	19	20	21	22	23	24	31 32	ST

C O N T R O L

ENTER PRESET VIEW ESC

•The Enter button blinks to indicate the need to save the preset.

•The Preset button continues to blink.

4.Save the Preset: Press and release the Enter button to save the preset. The current configuration is now stored in the selected memory location.

Press the button.

C O N T R O L

ENTER PRESET VIEW ESC

The Enter and Preset buttons return to unlit or background illumination.

1 2 3 4 15 16

17 18 19 20 31 32

I

N P U T S

All input buttons return to unlit or background illumination.

MTPX Plus Series • Operation 44