Installing the Software

NOTE: For an MTPX Plus 128, you must use version 8.0 or newer of the Matrix Switchers Control Program.

The program is contained on the Extron Software Products DVD. Install the software as follows:

NOTE: For full functionality, install both of the following programs:

The Matrix Switchers Control Program

The Firmware Loader

1.Insert the DVD into the drive. The Extron software DVD window should appear automatically (see figure 47).

Figure 47. Software DVD Window

NOTE: If the window does not self-open, run Launch.exe from the DVD.

2. Click the Software tab (see figure 47).

3.Scroll to the desired program and click Install (see figure 48).

Figure 48. Software Installation

4.Follow the on-screen instructions. By default, the installation of the Matrix Switchers

Control Program creates a C:\Program Files\Extron\ Matrix_Switchers directory, and it places the following four icons into a group folder named “Extron Electronics\Matrix Switchers:

MATRIX Switcher + Control Program

MATRIX Switcher + Help

Check for Matrix Updates

Uninstall MATRIX Switcher

MTPX Plus Series • Matrix Software 97

Page 103
Image 103
Extron electronic 68-1383-01 REV. E manual Installing the Software, Software DVD Window