Extron electronic 68-1383-01 REV. E Example 2 Add a video tie to a set of video and audio ties

The current configuration (see figure 20) is now:

•Input 5 video and audio are tied to output 3, output 4, and output 8

Input 5 (video/audio) tied

to outputs 3, 4, and 8

Input

5

3

4 Output

8	Video
	Audio

Figure 20. Example 1, Final Configuration

Example 2: Add a video tie to a set of video and audio ties

In the following example, a new video tie is added to the current configuration. The example shows the front panel indications that result from your actions.

NOTE: This example assumes that you have performed example 1.

1.Clear all selections: Press and release the Esc button.

2.Select video only for the tie: Press and release the Video button and the Audio button as necessary to light Video only.

I / O

VIDEO AUDIO

Press the Video button to toggle on and off. The button lights green when selected.

Press the Audio button to toggle on and off.

The button is unlit or background illuminated when deselected.

3.Select an input: Press and release the Input 5 button.

Press the button.

The button lights green to indicate that video outputs can be tied to or untied from this input.

The Output 3, Output 4, and Output 8 buttons light green to indicate the video ties created in example 1.

							INPUTS
1	2	3	4	5	6	7	8

1 2 3 4 5 6 7 8

OUTPUTS

4.Select the output: Press and release the Output 1 button.

Press the button.

The button blinks green to indicate that only the selected video input will be tied to this output.

1 2 3 4 5 6 7 8 15 16

17 18 19 20 21 22 23 24 31 32

O U T P U T S

C O N T R O L

ENTER PRESET VIEW ESC

The Enter button blinks green to indicate the need to confirm the change.

MTPX Plus Series • Operation 33