Extron electronic 68-1383-01 REV. E manual Mtpx Plus Series Introduction

The switcher can be operated remotely by any of the following when that device is connected to either MTPX Plus serial port:

•A control system

•A PC

•An Extron MKP 2000 remote control panel

•An Extron MKP 3000 remote control panel

For some outputs (most matrix sizes) or all outputs (MTPX Plus 128), bidirectional pass- through RS-232 signals from a dedicated source (rather than from the selected input) can be directly inserted into the signal set routed to the TP output. You can even route RS-232 on a link that is normally audio, such as to an MTP U R 15HD RSA SEQ receiver, which can autodetect whether its signal input includes an audio component or an RS-232 component.

The matrix switchers are housed in metal enclosures. Most models have mounting flanges for standard 19-inch racks built into the enclosure. The MTPX Plus 128 includes a kit for rack mounting.

The switcher has an internal 100 VAC to 240 VAC, 50-60 Hz, 30 watt power supply that provides worldwide power compatibility.

The MTPX Plus switcher has a minimum bandwidth of 300 MHz (-3 dB).

The switchers can also switch RGBS, RGsB, RsGsBs, HDTV, component video, S-video, and composite video.

MTPX Plus Series • Introduction 3