Extron electronic 68-1383-01 REV. E manual Performing Soft System Resets Resets 3, 4

Performing Soft System Resets (Resets 3, 4, and 5)

Perform a soft reset of the switcher as follows:

1.Use a small screwdriver to press and hold the rear panel Reset button until the front panel Video and Audio buttons blink the number of times for the desired reset: once

(events reset), twice (system reset), or three times (absolute reset) (see figure 43).

Press and hold the Reset button.

(Mode 1)	RESET
Events Reset

Reset LED flashes once.

3 seconds RESET

Release, then immediately press and release again.

RESET

Front panel I/O buttons flash once.

I / O

VIDEO AUDIO

Press and hold	Reset LED flashes twice.
the Reset button.

IP Settings	RESET	6 seconds	RESET
Reset
(Mode 4)

Release, then immediately press and release again.

RESET

Front panel I/O buttons flash twice.

I / O

VIDEO AUDIO

Press and hold the Reset button.

(Mode 5)	RESET
Absolute Reset

Reset LED flashes

three times.

9 seconds RESET

Release, then immediately press and release again.

RESET

Front panel I/O buttons flash three times.

I / O

VIDEO AUDIO

Figure 43. Soft System Resets

2.Release the Reset button and then immediately press and release the Reset button again. Nothing happens if the second momentary press does not occur within 1 second.

MTPX Plus Series • Operation 66