Extron electronic 68-1383-01 REV. E manual Command description Response description

Command/Response Table for SIS Commands (continued)

Command Function	SIS Command	Response	Additional description
	(Host to Unit)	(Unit to Host)

View ties, gain, volume, mutes, presets, and DIP switch status (continued)

View audio global preset	EX2#*X@*2VC}	X!n•X!n+1•X!n+1•X!n+2•...•X!n+15•Aud]
configuration		Show the audio configuration for preset
		X2#. Show the input tied to 16 sequential
		outputs, starting from output X@.
Command description:	preset #*starting output # (StO#)*2(=audio)VC
Response description:	input # (I#) tied to StO#•I# tied to StO#+1•I# tied to StO#+2• ... •I# tied to StO#15•Aud]

NOTES: • The starting output number (X@) should always be “1” for matrix sizes of 16 outputs or smaller.

• EX2#*X@*2VC} where X2# = 0 returns the current audio configuration.

Example: (MTPX Plus 1632)

View video room preset configuration

Command description:

Response description:

E15*17*2VC}

input 1 tied to output 19 no tied input

Response = tied input: 01•01•01•01•02•12•12•00•00•00•00•00•01•08•15•16•Aud

Output: 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Each position shown in the response is an output: left = starting output (17), right = starting output +15 (32). The number in each position is the input tied to that output.

In this example, preset 15, audio input 1 is tied to outputs 17, 18, 19, 20, and 29; input 2 is tied to output 21; input 12 is tied to outputs 22 and 23; input 8 is tied to output 30; input 15 is tied to output 31; and input 16 is tied to output 32. No input is tied to output 24, 25, 26, 27, and 28.

EX2%*X2#*1*1VC} X!n•X!n+1•X!n+1•X!n+2•...•X!n+15•Vid]

Show the video configuration for room X2%, preset X2#. Show the input tied to up to 16 outputs assigned to room X2%.

room #*room preset #*starting output # (StO#)*1(=video)VC

input # (I#) tied to StO#•I# tied to StO#+1•I# tied to StO#+2• ... •I# tied to StO#+15•Vid]

NOTE: The starting output number (X@) should always be “1” for matrix sizes of 16 outputs or smaller.

View audio room preset	EX2%*X2#*1*2VC}	X!n•X!n+1•X!n+1•X!n+2•...•X!n+15•Aud]
configuration		Show audio configuration for room X2%,
		preset X2#. Show the input tied to up to
		16 outputs assigned to room X2%.
Command description:	room #*room preset #*starting output # (StO#)*2(=audio)VC
Response description:	input # (I#) tied to StO#•I# tied to StO#+1•I# tied to StO#+2• ... •I# tied to StO#+15•Aud]

NOTE: The starting output number (X@) should always be “1” for matrix sizes of 16 outputs or smaller.

View Input Select DIP switch	EStat}	X2*1X2*2X2*3...X2*n*X(]	Each X2* is the position for that rear panel
positions and level/peaking status			Input Select DIP switch from 1 to n. n = 3
			for matrix sizes up to 1616, n = 6 for
			matrix sizes of 1632 and larger. X(
			indicates whether the input level/peaking
			is within the pre-determined threshold
			for the input tied to output 1 only.

NOTE: This command is invalid for the MTPX Plus 128 only.

NOTE: X! = Input number		00	– (maximum number of inputs for your model)
X@ = Output number		01	– (maximum number of outputs for your model)
X( = Threshold		0 = outside of threshold		1 = within threshold
X2# = Global or room preset #		01	- 32 (global) or 01-10 (room)
X2%	= Room # (for room presets)	10 max. (each can have up to 10 presets (X2#s) assigned
X2*	= Local input select DIP switch status	0 = RJ-45 position		1 = local input position

MTPX Plus Series • Programming Guide 90