Extron electronic 68-1383-01 REV. E manual Control Buttons and LEDs

Control Buttons and LEDs

NOTE: See “Front Panel Operations” for detailed descriptions of the following operations.

Primary functions

Action	Save changes	Select Preset mode	Select View mode	Cancel/Escape
Indication	Blink: Save needed	Blink: Save preset	View mode	Flashes once
		Lit: Recall preset	selected

ENTER PRESET VIEW ESC

Secondary functions

I/O grouping	Action/	Select and indicate	Select and indicate	Select and indicate	Select and indicate
	indication	group 1	group 2	group 3	group 4
Port and input	Action 1		Select Configuration mode.
configuration
	Action 2	Select 9600 baud	Select 19200 baud	Select 38400 baud	Select 115200
					baud
	Indication	Blink: 9600 baud	Blink: 19200 baud	Blink: 38400 baud	Blink: 115200 baud
Front panel	Action	With Video and
locks		Audio, select Lock
		mode 2 or toggle
		between mode 0
		and mode 0.
Audio	Action			In Audio mode,	In Audio mode,
				decrease input level	increase input level
				or output volume.	or output volume.

cEnter button — The Enter button has two primary functions (❏) and four secondary functions (•):

❏Saves configuration or preset changes that you make on the front panel. To create a simple configuration:

Specify video, audio, or both (see I/O buttons [item g] and [item h]).

Press the desired input button (item a).

Press the desired output button or buttons (item b).

Press the Enter button.

❏Indicates that a potential tie has been created but not saved.

•In the I/O Group mode, selects group 1 and indicates the selection.

•With the Preset, View, and Esc buttons, selects Serial Port and Audio/RS-232 Input Configuration mode.

•Selects 9600 baud for the rear panel Remote port in Serial Port and Audio/RS-232 Input Configuration mode and indicates the selection.

•With the Video and Audio buttons, selects front panel security Lock mode 2 or toggles between mode 0 (unlocked) and mode 2.

MTPX Plus Series • Operation 26