Reset the switcher to the factory default settings by pressing and holding the Video button and Audio button simultaneously while you apply AC power to the switcher (see figure 40).

Press and hold the Video and Audio buttons simultaneously while you apply power to the switcher.

I / O

The switcher flashes

the button indicators VIDEO AUDIO and then turns them off.

Continue to hold the Video and Audio buttons until all input and output buttons return to unlit and the Video and Audio buttons turn on.

Release the Video and Audio buttons.

Power

Figure 40. System Reset

NOTE: If background illumination was turned on before the reset, the I/O and control

buttons are unlit after the reset. But, when you cycle power, background

illumination returns to as selected.

Background Illumination

The buttons on the front panel can be set to provide amber background illumination at all times or the background illumination can be turned off. To toggle the background illumination on or off, press and hold the Input 1 and Input 2 buttons simultaneously for approximately 2 seconds (see figure 41).

Press and hold the buttons.

1

2

16

I

N

 

 

 

P

 

 

 

U

17

18

32

ST

After the illumination status of the buttons change (after approximately 2 seconds), release the buttons.

Figure 41. Toggle Background Illumination on or off

MTPX Plus Series • Operation 61

Page 67
Image 67
Extron electronic 68-1383-01 REV. E manual Background Illumination, System Reset