Extron electronic 68-1383-01 REV. E Optimizing the Audio, Video Adjustments, Troubleshooting

Optimizing the Audio

Each audio level for each input can be adjusted within a range of -18 dB to +24 dB, so there are no noticeable volume differences between sources and for the best headroom and signal-to-noise ratio. The volume for each local audio output can be adjusted from full loudness to effectively muted. Adjust the levels as follows:

1.Connect audio sources to all desired inputs and connect the local audio outputs to output devices such as audio players. See “Signal inputs”, in the “Installation” section. For best results, wire all of the inputs and the outputs balanced.

2.Power on the audio sources, the switcher, and the audio players.

3.Switch among the inputs (see “Creating a configuration”, on page 31), listening to the audio with a critical ear or measuring the output audio level with test equipment, such as a VU meter.

4.As necessary, adjust the input audio level of each input (see “Viewing and Adjusting the Input Audio Level”, on page 48) so that the approximate output level is the same for all selected inputs.

5.Tie an audio input to each local audio output.

6.As necessary, adjust the output audio level of each output (see “Viewing and Adjusting the Local Output Volume”, on page 53).

Video Adjustments

Image adjustments are available via SIS commands, the Matrix Switchers Control Program, and the built-in HTML pages. See “Optimizing the Video” in the “Matrix Software” section.

Troubleshooting

This section recommends what to do if you have problems operating the switcher.

1.Ensure that all devices are plugged in and powered on.

2.Check to see if one or more outputs are muted.

3.Ensure an active input is selected for output on the switcher.

4.Ensure that the proper signal format is supplied.

5.Check the cabling and make corrections as necessary.

6.Call the Extron S3 Sales and Technical Support Hotline if necessary. See the end of this guide for the phone number in your region of the world.

MTPX Plus Series • Operation 67