Extron electronic 68-1383-01 REV. E manual Example 3 Remove a tie from a set of ties

5.Confirm the change: Press and release the Enter button.

Press the Enter button to confirm the configuration change.

ENTER

All input buttons and output buttons return to unlit or background illumination.

The Enter button returns to unlit or background illumination.

The current configuration (see figure 21) is now:

•Video — Input 5 video is tied to output 1, output 3, output 4, and output 8.

•Audio — Input 5 audio is tied to output 3, output 4, and output 8.

Input 5 video tied

to outputs 1, 3, 4, and 8

Input 5 audio tied

to outputs 3, 4, and 8

Input

5

1

3

4 Output

8	Video
	Audio

Figure 21. Example 2, Final Configuration

Example 3: Remove a tie from a set of ties

In the following example, an existing tie is removed from the current configuration. The example shows the front panel indications that result from your actions.

NOTE: This example assumes that you have performed example 1 and example 2.

1.Clear all selections: Press and release the Esc button.

2.Select audio only for the tie: Press and release the Video button and the Audio button as necessary to light Audio only.

I / O

VIDEO AUDIO

Press the Video button to toggle on and off.

The button is unlit or background illuminated when deselected.

Press the Audio button to toggle on and off. The button lights red when selected.

MTPX Plus Series • Operation 34