Extron electronic 68-1383-01 REV. E manual Changing the output volume level

Changing the output volume level

Users can set the volume level for each local audio output volume level from the I/O Settings page. Volume is adjustable through a range of zero steps of attenuation (full attenuation, minimum volume) to 64 steps of attenuation (no attenuation, full volume).

Change the audio volume setting for an output as follows:

1.Click the Volume drop box for the desired output. A drop-down scroll box appears.

2.Click and drag the slider or click on the scroll up button or the scroll down button until the desired value is visible.

NOTES: • As an alternative to steps 1 and 2, or to listen to

the audio as you make adjustments, click on the up

button or down button.

• Table 8, on the on the next page, defines the value of each audio volume step.

Muting and unmuting an audio or RS-232 output

Mute and unmute an audio or RS-232 output by clicking the associated Audio Mute button. Each click toggles the mute status.

MTPX Plus Series • HTML Operation 143