Extron electronic 68-1383-01 REV. E manual Mail Addressee fields, Typical Mtpx Plus E-mail

E-mail Addressee fields

The eight E-mail Addressee fields permit the administrator to identify the e-mail addresses of the personnel to whom the MTPX Plus switcher e-mails notification of its failure and repair status. Figure 55 shows a typical e-mail from the switcher.

Miles Standish

From:	MTPX-FF-FF-09@folklore.net
Sent:	Tuesday, June 10, 2008 10:05 AM
To:	Miles Standish
Subject:	MTPX-FF-FF-09 - Fan Failure

Tue, 10 Jun 2008 10:05:07

Unit Name = MTPX-FF-FF-09

Unit IP Address = 192-168-254-254

Figure 55. Typical MTPX Plus E-mail

The radio buttons and check boxes associated with each address field permit the administrator to specify specific e-mail requirements for each recipient.

Edit these fields and controls as follows:

1.Click in the desired E-mail Addressee field. The graphic cursor becomes a text cursor.

2.Edit the e-mail address as desired. Standard e-mail address conventions

(for example: nnnnn@xxx.com) apply.

3.Press the <Tab> key on the keyboard or click in another field to exit the e-mail addressee field.

4.In the square Fans check boxes associated with each addressee, select or deselect the fans for status to be e-mailed to the addressee.

5.In the round radio buttons associated with each addressee, select whether the addressee is to be e-mailed of failures, fixes, both, or not be notified.

The None radio button is useful for temporarily removing personnel from the e-mail list when they are unavailable, such as on travel or vacation.

6.If desired, click the Send test E-mailbutton to test the e-mail function.

7.Click the Take button to make the e-mail address changes take affect.

MTPX Plus Series • Matrix Software 106