Extron electronic 68-1383-01 REV. E manual Global Presets, Saving a preset, Recalling a preset

Global Presets Page

You can save and recall global presets from the Global presets page (see figure 89). Access the Global presets page by clicking the Global Presets link on the left of the Control page.

Set and View Ties

Picture Settings

MTPX Configuration

I/O Settings

Refresh

Figure 89. Global Presets Page

Saving a preset

Save the current configuration (configuration 0) as a preset as follows:

1.Click the Save Preset button.

2.Select the desired preset by clicking on one of the presets listed. To create a new preset, click one of the [unassigned] buttons. Overwrite an existing preset by clicking an already existing preset.

3.If desired, type over the current name in the box adjacent to the Save Preset button.

NOTE: The HTML language reserves certain characters for specific functions (see

“Special Characters“ in the “Programming Guide” section).

If you do not rename an unassigned button, the MTPX Plus switcher names the preset as Preset {next available number}.

If you do not rename an existing preset when it is overwritten, the MTPX Plus switcher retains the same name.

4.Click the Accept button.

Recalling a preset

To recall a global preset as the current configuration, click the button associated with the desired preset.

MTPX Plus Series • HTML Operation 145