Extron electronic 68-1383-01 REV. E manual X1 =

X1%	=	TP output number	01 – (maximum number of TP outputs for your model)
X1^	=	Local video output number	1 or 2

NOTE: X1^ is applicable to MTPX Plus 128 and matrix sizes 1632 and larger only.
X1& = Local output sync polarity	0	= H- / V- (default)	3	= H+ / V+
	1	= H+ / V-	4	= No sync processing (composite, S-video, YUV)
	2	= H- / V+

X1*	= Local audio output number		1	– 2	(MTPX Plus 128)
			1	– 4	(other matrix sizes 1616 and smaller)
			1	– 8	(matrix sizes 1632 and larger)
X1( =		Volume adjustment range	0	– 64		(1 dB/step except for 0-to-1, which is 13 dB) (default = 64 [0 dB])
			(See the table on page 84.)
X2)	=	Audio gain	0	– 24		(1 dB/step)
X2! =		Numeric dB value	–18 to +24 (45 steps of gain or attenuation) (Default = 0 dB)
X2@ =		Audio attenuation	1	– 18		(1 dB/step)
X2# =		Global or room preset #	00 - 32 (global) or 00-10 (room) (0 = current configuration)

NOTE: A Room preset is a stored configuration with all of the outputs assigned to a single room. When a room preset is recalled from

memory, it becomes the current configuration.

X2$ = Name	12 characters maximum for input, output, and global preset names
	11 characters maximum for room preset names
	Upper- and lower-case alphanumeric characters and
	_ / and spaces are valid.

NOTE: The HTML language reserves certain characters for specific functions (see “Special Characters“ on page 95).

X2% = Room # (for room presets)

10 max. (each can have up to 10 presets (X2#s) assigned)

NOTE: A Room is a subset of operator-selected outputs that relate to each other. The MTPX Plus switchers support up to 10 rooms, each of which can consist of from 1 to 16 outputs.

X2^ = Group # (for I/O grouping)

1 through 4 groups (0 = no group)

X2& = Audio or RS-232 mute:			0 = no mutes	2 = audio or RS-232 mute
X2*	=	Local input select DIP switch status	0 = RJ-45 position	1 = local input position
X2( = Number of inputs			8, 12, 16, or 32
X3)	= Number of outputs		8, 16, or 32
X3! = Part number			60-nnn-nn or 60-nnnn-nn
X3@ = Firmware version number to second decimal place (x.xx)
X3# =		Verbose firmware version-description-upload date/time (see the Query firmware version (verbose) command on page 91).
X3$ =		Voltage	Positive or negative voltage and magnitude
X3%	=	Internal temperature	Degrees Fahrenheit
X3^ = Fan speed			RPM

MTPX Plus Series • Programming Guide 79