Extron electronic 68-1383-01 REV. E Input skew adjustment, Edid commands, Output pre-peaking

Command/Response Table for SIS Commands (continued)

Command Function	SIS Command	Response	Additional description
	(Host to Unit)	(Unit to Host)

Input skew adjustment

NOTE: For the MTPX Plus 128, these commands are valid for inputs 5 through 12 only.

Set all input skew adjustment values	EX#*X1)*X1)*X1)Iseq}
		IseqX#*X1)*X1)*X1)]
Example:	E2*0*0*4Iseq}	Iseq02*00*00*04]
Increment one input skew	EX#*X1!+Iseq}	IseqX#*X1)*X1)*X1)]
adjustment value
Example:	E2*2+Iseq}	Iseq02*00*00*05]

Set a specific skew adjustment for the TP input. X1) values are listed in RGB order.

Set skew settings for input 2 as follows: Red = 0 ns

Green = 0 ns

Blue = 8 ns (delayed 8 ns).

Increase the X1! plane skew adjustment for input X# by 1 step (2 ns).

Increase the blue skew for input 2 by 2 ns to 10 ns.

Decrement one input skew	EX#*X1!-Iseq}	IseqX#*X1)*X1)*X1)]	Decrease the X1! plane skew adjustment
adjustment value			for input X# by 1 step (2 ns).
Read input skew adjustment values	EX#Iseq}	X1)*X1)*X1)]

EDID commands

NOTE: For the MTPX Plus 128, these commands are valid for inputs 1 through 4 only.

Assign EDID data to an input Assign EDID data to all inputs

Save output #1 EDID data to a user- defined space

View EDID data assigment

EAX**X1$EDID}	EdidAX**X1$]
EA*X1$*EDID}	EdidA0*X1$]
ES*X1$EDID}	EdidSX1$]
EA*X*EDID}	X1$]

For this command, the X1$ value must be from 31 to 34.

Output pre-peaking

Set output pre-peaking on	EX1@*1Opek}	OpekX1@*1]	Pre-peak the TP output.
Set output pre-peaking off	EX1@*0Opek}	OpekX1@*0]	Do not pre-peak the TP output.
Read output pre-peaking setting	EX1@Opek}	X1#]

NOTE: X# = TP input number	01		– (maximum number of TP inputs for your model)
X* = Input number	01		– (maximum number of inputs for your model)
X1) = Skew adjustment range	00		– 31 (each step = 2 ns)
X1! = Video plane	0	= red
	1	= green
	2	= blue
X1@ = Pre-peakable output number	MTPX Plus 168			01 – 04
	MTPX Plus 128, 816, 1616, 3216			01 – 08
	MTPX Plus 1632, 3232			01 – 16
X1# = Pre-peaking	0	= off
	1	= on
X1$ = DDC value (EDID)	See page 78.

MTPX Plus Series • Programming Guide 82