Extron electronic 68-1383-01 REV. E manual Settings, Changing the input gain and attenuation

I/O Settings Page

The I/O Settings page provides a way to set the input audio gain and attenuation and the output volume. Access the I/O Settings page (see figure 88) by clicking the I/O Settings link on the Control page.

Set and View Ties

Picture Settings

MTPX Configuration

Refresh

Global Presets

Figure 88. I/O Settings Page

Changing the input gain and attenuation

Users can set the level of audio gain or attenuation (-18 dB to +24 dB) of each input from the I/O Settings page. Audio levels can be adjusted so there are no noticeable volume differences between sources.

Change the gain and attenuation setting for an input as follows:

1.Click the Input Audio Level drop box for the desired input. A drop-down scroll box appears.

2.Click and drag the slider or click on the scroll up button or the scroll down button until the desired value is visible.

NOTE: As an alternative to steps 1 and 2, or to listen

to the audio as you make adjustments, click on

the up button or down button.

MTPX Plus Series • HTML Operation 142