Symbol definitions

ASCII to Hex Conversion Table

Using the Command and Response Tables

The command and response	Space
table begins on page 80.
Symbols used in the
table represent variables in the
command and response fields.
Command and response examples
are shown throughout the table.
With the exception of the audio
input gain and attenuation
commands, the SIS commands are
not case sensitive. The ASCII to
HEX conversion table at right is for

use with the command and response table.

•

]= Carriage return/line feed

} = Carriage return (no line feed)

= Pipe (can be used interchangeably with the } character)

• = space E = Escape key

W = Can be used interchangeable with the E character X! = Input number (for tie)

X@ = Output number X# = TP input number

X$ = Audio/RS-232 wire pair input type X% = RS-232 output insert port

X^	=	RS-232 output insert status
X&	=	Input signal level/peaking range
X*	= Input number
X(	=	Threshold
X1)	= Skew adjustment range
X1!	= Video plane
X1@	= Pre-peakable output number
X1#	= Mute, pre-peaking, Lock mode, power supply
X1$	= DDC value (EDID):

00 – (maximum number of inputs for your model) (00 = untied)

01 – (maximum number of outputs for your model)

01– (maximum number of TP inputs for your model)

000 – 255

01 – (maximum number of inputs for your model)

MTPX Plus Series • Programming Guide 78