Lock executive modes | Extron electronic 68-1383-01 REV. E specs

Command/Response Table for SIS Commands (continued)

Command Function	SIS Command	Response	Additional description
	(Host to Unit)	(Unit to Host)

Save, recall, and directly write global presets (continued)

Direct write process —

NOTE: The direct write of a global preset should always be preceded by a clear global preset ties command of that same preset number,

as shown below. In a directly-written preset, the input for each output position (or no tied input) remains unchanged unless

overwritten or cleared.

If you do not clear the ties in a global preset number before you directly write a global preset to that number, ties that are part of the previous version of the specified preset with the same number can unexpectedly become part of the newly-created preset.


Clear global preset ties	E+X2#P0*!}				SprX2#]
Directly write a global preset	E+X2#PX!X@!X!X@%X!X@$ ... X!X@&}
					SprX2#]
Example:	E+27P0*!}				Spr27]
			$
	Esc	+27P125!1009%3*2	$	3*8&
					Spr27]

Clear all ties in preset X2#.

The tie all (!), tie RGB (&),

tie video (%), and tie audio ($) commands are all valid.

Clear all ties in preset 27.

Brackets are shown to separate ties for clarity only. Create global preset 27, which ties video and audio input 12 to output 5, video input 10 to output 9, audio input 3 to output 2, and video input 3 to output 8.


Write room outputs		EX2%,X@1,X@2, ... X@nMR] MprX2%,X@1,X@2, ... X@n] See notes.
NOTES: •	A room can contain a maximum of 16 outputs (X@s).
•	An output can belong to only one room.
•	The maximum number of rooms (X2%s) is 10.
•	If no room name is assigned, the default name is “Room #X2%.”

Example:

Read room outputs

Example:

Recall room preset Clear room preset ties Directly write a room preset

Example:

E8,3,04,5,6MR}	Mpr8,03,04,05,06]
EX2%MR}	X2#,X@1,X@2, ... X@n]
E3MR}	Class 1,01,02,08,09]

X2%*X2#.RmmX2%•RprX2#]

E+X2%*X2#P0*!] RmmX2%•SprX2#]

E+X2%*X2#PX!*X@!X!*X@%X!*X@$ ... X!*X@&}

RmmX2%•SprX2#]

Esc+7*3P12*7&11*5$4*5%6*6!

Rmm07•Spr03]

Outputs 3, 4, 5, and 6 are assigned to room 8.

Outputs 1, 2, 8, and 9 are assigned to room 3, which named “Class 1”.

Command character is a period. Clear all ties in room X2# preset X2#.

Enter as many ties as are valid for this model. Tie all (!), tie RGB (&), tie video (%), and tie audio ($) commands are all valid.

Brackets are shown to separate ties for clarity only. Create preset 3 for room 7, which ties audio input 12 to output 7, video input 11 to output 5, RGB input 4 to output 5, and video and audio input 6 to output 6.