Extron electronic 68-1383-01 REV. E Typical Mtpx Plus Twisted Pair Matrix Switcher Application

Rack Mounted PC

Control

SystemTCP/IP

Network

OUTPUTS

RGB

POWER

INPUT

Extron

MTP U R RSA SEQ

Universal Receiver

RS 232

Audio

Extron

MTPX Plus 3232

Twisted Pair

Matrix Switcher

INPUT

	OUTPUTT SV
	A
S-VIDEO	MTP

Extron

MTP T SV A

Transmitter

DVD

AUDIO

POWER

INPUT

Extron

MTP T 15HD A

Transmitter

A

T 15HD

MTP

OUTPUT

MONITOR

							S-video
							RGBHV
Extron							Flat Panel Display
						OUTPUTS
MTP U R A							Audio
Universal Receiver		U	R	A
		MTP					S-video
		POWER			RGB
			INPUT
							RGBHV
Extron	Extron
	SI 28					IN	Projector
HPA 502						AUDIO
	Surface-mount					COMPUTER
						IN

Audio Power	Speakers
Ampli￿er

Extron

MTP T 15HD A D

Transmitter

PC

PC

Figure 1. Typical MTPX Plus Twisted Pair Matrix Switcher Application

Additionally, some inputs feature 15-pin HD and 5-pole 3.5 mm captive screw input connectors for local RGB (VGA) and stereo audio inputs without an MTP transmitter. Some outputs feature 15-pin HD output connectors and 5-pole 3.5 mm captive screw ports for local RGB (VGA) and mono audio output without an MTP receiver. The local input and output 15-pin HD connectors can also support HD-YUV video, YUV video, S-video, and composite video.

NOTE: For most switchers, the local inputs are an option for use in place of the TP

input (input 1 can be either on the local connectors or the TP connector, for

example).

For the MTPX Plus 128, four inputs are local only and eight inputs are TP only.

When audio is part of the TP input signal, the audio switching can either be linked with the video (audio follow) or be independent of the video (audio breakaway). Adjustable input audio gain and attenuation compensates for level differences between audio inputs.

NOTE: For low resolution MTPs (S-video and composite video) on the TP inputs, the

MTPX Plus audio circuits are compatible only with the newer generation,

mono audio models. See your MTP transmitter/ receiver and refer to the associated manual to determine which MTP models you have.

The matrix switcher can be remotely controlled via its rear panel Remote port (RS-232/RS-422 for most models, RS-232 only for MTPX Plus 128) and its front panel Configuration port (RS-232 for most models, USB port for MTPX Plus 128) using either Extron Windows®-based Matrix Switchers Control Program or the Simple Instruction Set (SIS™). The SIS is a set of basic ASCII code commands that provides control through a control system or PC without programming long, obscure strings of code.

MTPX Plus Series • Introduction 2