Extron electronic 7200, 3200 manual Passwords, Resetting a password

Passwords Page

Access the Passwords page (see figure 57) by clicking the Passwords link on the System Settings page.

Figure 57. Passwords Page

NOTE: If the switcher is password protected, fields on this page can be edited only by personnel logged in as administrators.

The fields on the Passwords page are for entering and verifying administrator and user passwords. Passwords are case sensitive and are limited to as many as 12 upper-case and lower-case alphanumeric characters. Each password must be entered twice; once in the Password field and then again in the Re-enter Password field. Characters in these fields are masked by asterisks (*****). If you do not want to password protect an access level, leave the Password field and the Re-Enter Password field blank. After entering the password in both fields, click the Submit button.

NOTE: An administrator password must be created before a user password can be created.

Resetting a password

Reset an existing password so that no password is required as follows:

1.Clear any existing password in both the Password and Re-enter Password fields.

2.Tap the <space> bar once to enter a single ASCII space character in both the Password and Re-enter Password fields.

3.Click the Submit button.

FOX Matrix 3200 and 7200 Switchers • HTML Operation 100