Extron electronic 3200, 7200 manual Performing Soft System Resets Resets 3, 4

Performing Soft System Resets (Resets 3, 4, and 5)

Perform a soft reset of the switcher as follows:

1.Use an Extron Tweeker or other small screwdriver to press and hold the rear panel Reset button until the front panel View and Esc buttons blink the number of times for the desired reset: once (events reset), twice (system reset), or three times (absolute reset) (see figure 26).

Press and hold	Reset LED blinks once.	Release, then immediately
the Reset button.		press and release again.
Events
Reset	3 seconds
(Mode 3) RESET

View and Esc buttons blink once.

CONTROL

T VIEW ESC

Press and hold	Reset LED blinks twice.	Release, then immediately
the Reset button.		press and release again.
IP Settings
Reset	6 seconds
(Mode 4) RESET

View and Esc buttons blink twice.

CONTROL

T VIEW ESC

Press and hold	Reset LED blinks	Release, then immediately
the Reset button.	three times.	press and release again.
Absolute
Reset	9 seconds
(Mode 5) RESET

View and Esc buttons blink three times.

CONTROL

T VIEW ESC

Figure 26. Soft System Resets

2.Release the Reset button and then immediately press and release the Reset button again. Nothing happens if the second momentary press does not occur within 1 second.

FOX Matrix 3200 and 7200 Switchers • Operation 45