Extron electronic 3200 3 4 5 6 7 8 15 17 18 19 20 21 22 23 24 31, Example 1 Create a set of ties

Example 1: Create a set of ties

In the following example, input 5 is tied to outputs 3, 4, and 8. The steps show the front panel indications that result from your actions.

1.Clear all selections: Press and release the Esc button.

Press the Esc button to clear all selections.

C O N T R O L

ENTER PRESET VIEW ESC

The button flashes once.

2.Select an input: Press and release the input 5 button.

Press and release the Input 5 button.

The button lights.

INPUTS

1 2 3 4 5 6 7 8 15 16

17 18 19 20 21 22 23 24 31 32

3.Select the outputs: Press and release the output 3, output 4, and output 8 buttons.

Press and release the Output 3, Output 4, and Output 8 buttons. The buttons blink to indicate that the selected input will be tied to these outputs.

1 2 3 4 5 6 7 8 15 16

17 18 19 20 21 22 23 24 31 32

OUTPUTS

C O N T R O L

ENTER PRESET VIEW ESC

The Enter button blinks to indicate the need to confirm the change.

NOTE: You can cancel the entire set of ties at this point by pressing and releasing the Esc button. The Esc button flashes once.

4.Confirm the change: Press and release the Enter button.

Press the Enter button to confirm the configuration change.

ENTER

All input buttons and output buttons return to unlit or background illumination.

The Enter button returns to unlit or background illumination.

FOX Matrix 3200 and 7200 Switchers • Operation 27