Extron electronic 3200, 7200 Command and Response Table for SIS Commands, Create ties, Read ties

Command and Response Table for SIS Commands

Command Function SIS Command	Response	Additional description
(Host to Unit)	(Unit to Host)

NOTES:

•The matrix switchers support 1- and 2-digit numeric entries (1*1 or 02*02).

•Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&03*03%4*8$.

Create ties

NOTES:

•The quick multiple tie and tie input to all output commands activate all I/O switches simultaneously.

•The ! tie command, & tie command, and % tie command can be used interchangeably.

•The ! tie all command, & tie all command, and % tie all command can be used interchangeably.

Tie input X! to output X@, Example:

Tie input X! to output X@,

Example (see 2nd Note bullet, above):

Tie input X! to output X@

Example (see 2nd Note bullet, above):

Quick multiple tie

Example:

X!*X@!	OutX@•InX!•All]	Tie input X! to output X@.
1*3!	Out03•In01•All]	Tie input 1 to output 3.
X!*X@&	OutX@•InX!•RGB]	Tie input X! to output X@.
10*4&	Out04•In10•RGB]	Tie input 10 RGB to output 4.
X!*X@%	OutX@•InX!•Vid]	Tie input X! to output X@.
7*5%	Out05•In07•Vid]	Tie input 7 video to output 5.
E+QX!*X@!...X!*X@&}	Qik]
E+Q3*4!3*5%3*6&}	Qik]	Tie input 3 to output 4, tie input 3 to output 5,
		and tie input 3 to output 6.

Tie input to all outputs	X!*!	InX!•All]
Example (see last Note	5*!	In05•All]	Tie input 5 to all outputs.
bullet, above):
TIP: 0*1! clears all ties.
Tie input to all outputs	X!*&	InX!•RGB]
Example (see last Note	8*&	In08•RGB]	Tie input 8 to all outputs.
bullet, above):
Tie input to all outputs	X!*%	InX!•Vid]
Example (see last Note	10*%	In10•Vid]	Tie input 10 to all outputs.
bullet, above):

Read ties

NOTES:

•The ! read tie command, & read tie command, and % read tie command can be used interchangeably.

•When the switcher is in verbose mode, the response is OutX@•InX!•(All)(RGB) or (Vid)].

Read tied input

Read tied input, RGB output Read tied input, Vid output

X@! X@& X@%

X!]	Input X!
X!]	Input X!
X!]	Input X!

is tied to output X@. is tied to output X@. is tied to output X@.

Channel mute commands

Channel mute	X@*1B	VmtX@*1]
Channel unmute	X@*0B	VmtX@*0]
Read channel mute	X@B	X#]
Global channel mute	1*B	Vmt1]
Global channel unmute	0*B	Vmt0]

Mute output X@ channel (no signal is output, but the light output remains active).

Unmute output X@ channel (signal is output).

1 = mute on, 0 = mute off. Mute all output channels. Unmute all output channels.

NOTE: X! = Input number (for tie)	00	– (maximum number of inputs for your configuration) (00 = untied)
X@ = Output number	01	– (maximum number of outputs for your configuration)
X# = Mute	0 = not muted, 1 = muted

FOX Matrix 3200 and 7200 Switchers • Programming Guide 59