Extron electronic 3200, 7200 manual Using Presets, Example 6 Saving a preset

Using Presets

The current configuration (configuration 0) can be saved as a preset in any one of

32 (FOX Matrix 3200) or 64 (FOX Matrix 7200) preset memory addresses. Presets can be saved and recalled from the front panel. The preset locations are assigned to input buttons 1 through 32 (64). When a preset is retrieved from memory, it becomes the current configuration.

NOTES:

•Presets cannot be viewed from the front panel unless they are recalled as the current configuration. Presets can be viewed using the Extron Matrix Switchers Control Program (see the Presets menu description in the “Matrix Software” section on page 85).

•The current configuration and all presets are stored in non-volatile memory. When power is removed and restored, the current configuration is still active and all presets are retained.

• When a preset is recalled, it replaces the current configuration, which is lost unless it is also stored as a preset. The recalled preset overwrites all of the current configuration ties in favor of the preset configuration ties.

Example 6: Saving a preset

In the following an example, the current configuration is saved as a preset. The example shows the front panel indications that result from your actions.

1.Clear all selections: Press and release the Esc button.

2.Select Save Preset mode: Press and hold the Preset button for approximately 2 seconds until it blinks.

PRESET 2 seconds PRESET

Press and hold the Preset button until it blinks.

All input buttons with assigned presets light.

If you then save the configuration to a lit preset number,

the configuration data at that preset location will be overwritten.

Lit

(preset assigned)

1 2 3 16

17 18 19 32

Unlit

(no preset assigned)

3.Select the preset: Press and release the input button or output button for the desired preset.

Press and release the Input 1 button.

The button blinks to indicate that this preset number is selected but not saved.

INPUTS

C O N T R O L

ENTER PRESET VIEW ESC

1 2 3 4 5 6 7 8 15 16

17 18 19 20 21 22 23 24 31 32

The Enter button blinks to indicate the need to save the preset.

The Preset button continues to blink.

FOX Matrix 3200 and 7200 Switchers • Operation 37