Extron electronic 3200, 7200 manual Hardware Address field, Use Dhcp check box

The default addresses are as follows, but if these conflict with other equipment at your installation, you can change the addresses to any valid value:

• IP address 192.168.254.254 • Gateway address 0.0.0.0

•Subnet mask 255.255.0.0

NOTES:

•The address fields are unavailable when DHCP is selected.

•Editing the addresses while connected via the Ethernet port can immediately disconnect the user from the switcher. Extron recommends editing this field using one of the serial ports and protecting the Ethernet access by assigning an administrator password to qualified and knowledgeable personnel only.

The Extron Name/Descriptor field contains the name of the matrix switcher. This descriptor can be changed to any valid name, up to 12 alphanumeric characters.

The Mail Server Domain Name field displays the domain name that the FOX matrix switcher uses to log on to the e-mail server. Standard domain conventions (such as xxx.com) apply.

NOTE: The HTML language reserves certain characters for specific functions (see Special Characters on page 70). In the Mail Server Domain Name field, the @ character is acceptable only as the lead-in to the domain name (such as @folklore.net).

Edit any of these fields as follows:

1.Click in the desired field. The graphic cursor becomes a text cursor.

2.Edit the address or name as desired.

3.Press the <Tab> key on the keyboard or click in another field to exit the field.

4.Click the Take button to make the address change take affect.

Hardware Address field

The hardware address is hardcoded in the FOX matrix switcher and cannot be changed.

Use DHCP check box

The Use DHCP check box directs the FOX matrix switcher to ignore any entered IP addresses and to obtain its IP address from a Dynamic Host Configuration Protocol (DHCP) server (if the network is DHCP capable). Contact the local system administrator to determine whether to use DHCP.

Date, Time (local), and GMT (offset) fields

The Date field displays the current date in the Greenwich Mean Time zone. The Time (local) field displays the current time in the local time zone.

The GMT field displays the amount of time, in hours and minutes, that the local time varies from the GMT international time reference.

NOTE: Rather than the following procedure, you can click the Sync Time to PC button to set the switcher to the internal time of your computer.

FOX Matrix 3200 and 7200 Switchers • Matrix Software 77