Extron electronic 7200, 3200 manual Power Supply Modules and Indicator LEDs, Cooling Fan assemblies

SDI/HD-SDI Monitor

Extron

VSC 900D VGA Input

Computer-to-Video Scan Converter (SDI only)

	Extron
Extron	FOX Matrix 3200
	Matrix Switcher
BBG 6 A
Blackburst/Color Bars/
Audio Generator

	1-8
	9-16
	17-24
	25-32
REMOTE 232/RS-RS -422	RESET
LAN ACT LINK	TRI-LEVELBILEVEL-

SDI/HD-SDI	SDI/HD-SDI	SDI/HD-SDI
Video Camera	Video Camera	Video Camera

Figure 12. Multiple Device Example of a FOX Matrix 3200 External Sync

Power Supply Modules and Indicator LEDs

GPrimary and Redundant AC power connectors (see figure 3 on page 8 and figure 4 on page 9) — Plug standard IEC power cords into these connectors to connect the switcher to 100 VAC to 240 VAC, 50 or 60 Hz power sources.

NOTE: For the most reliable power, connect the power cord from the Redundant power connector to either an uninterruptible power source or to a power source that is completely independent from the primary power source.

HPrimary and Redundant power supply indicator LEDs (see figure 3 and figure 4) —

Green — Indicates that the associated power supply is operating within normal tolerances.

Red — Indicates that the associated power supply is operating outside the normal tolerances or has failed. See Removing and Installing a Power Supply Module on page 113 section to replace the power supply.

Cooling Fan assemblies

IPrimary and Redundant cooling fans (see figure 3 and figure 4) — Cool the equipment. If a fan has failed, replace it at your earliest opportunity. See Removing and Installing a Fan Module on page 114 to replace the fans.

FOX Matrix 3200 and 7200 Switchers • Installation 16