Extron electronic 7200, 3200 manual Uploading Html Files, Html Files List Window

Uploading HTML Files

You can create customized HTML pages for the switcher to display. The HTML Files List window (see figure 43) provides a way to view the contents of the file system of the switcher and to upload custom HTML pages to the switcher.

4

7

8

Figure 43. HTML Files List Window

NOTES:

•The files listed in figure 43 are shown for example only and may not be present on your switcher.

•The HTML Files List window is for inserting your custom HTML pages. This is not the window to replace the firmware that controls all switcher operation. See Updating the Firmware on page 80 to replace the firmware.

•The HTML language reserves certain characters for specific functions (see Special Characters on page 70).

Upload HTML pages as follows:

1.	Connect the PC to the FOX matrix switcher via a serial port or the LAN port.
2.	Start the Matrix Switchers Control Program and connect to the FOX matrix switcher
	(see Using the Matrix Switcher Control Software, steps 1 through 3, starting on
	page 73).
3.	Click Tools > HTML File Manager.
4.	Click the Pick File(s) to Load to Server button. An open file window appears.
5.	Navigate to the folder where you saved the HTML file or files. Select the file or files.
	NOTES:
	•	To select multiple files, hold the Ctrl key while you		select the desired files.
	•	If you want one of the custom HTML files that you		created to be the default
		start-up page, name the file “index.html.”	The FOX	matrix switcher looks for
		that file name when you first connect to it	using an	Internet browser.
6.	Click the Open button. The upload of the file or files to the FOX matrix switcher may take
	a few minutes.
7.	Click the Update button to confirm the upload.
8.	Click the Close button to exit the HTML Files List window.

FOX Matrix 3200 and 7200 Switchers • Matrix Software 84