4.Confirm the change: Press and release the Enter button.

Press the Enter button to confirm the configuration change.

ENTER

All input buttons and output buttons return to unlit or background illumination.

The Enter button returns to unlit or background illumination.

The current configuration (see figure 20) is now input 5 tied to output 1, output 3, output 4, and output 8.

Input 5 tied

to outputs 1, 3, 4, and 8

Input

5

1

3

4Output

8

Figure 20. Final Configuration, Example 2

Example 3: Remove a tie from a set of ties

In the following example, an existing tie is removed from the current configuration. The example shows the front panel indications that result from your actions.

NOTE: This example assumes that you have performed example 1 on page 27 and example 2 on the previous page.

1.Clear all selections: Press and release the Esc button.

2.Select an input: Press and release the input 5 button.

Press and release the Input 5 button.

The button lights.

 

 

 

 

 

 

 

INPUTS

 

1

2

3

4

5

6

7

8

15

16

17

18

19

20

21

22

23

24

31

32

The Output 1, Outout 3, Output 4, and Output 8 buttons light to indicate the ties created in example 1 and example 2.

1

2

3

4

5

6

7

8

15

16

17

18

19

20

21

22

23

24

31

32

 

 

 

 

 

 

 

OUTPUTS

 

FOX Matrix 3200 and 7200 Switchers • Operation 29

Page 37
Image 37
Extron electronic 3200, 7200 manual Example 3 Remove a tie from a set of ties