Extron electronic 3200 Example 5 Grouping inputs and outputs, Assign inputs and outputs to group

Example 5: Grouping inputs and outputs

In the following example, several switcher inputs and outputs are assigned to groups. The steps show the front panel indications that result from your actions.

1.Clear all selections: Press and release the Esc button.

2.Enter I/O Group mode: Simultaneously press and hold the Input 1 and Output 1 buttons for approximately 2 seconds and then release the buttons.

Press and hold the Input 1 button and Output 1 button.

1 2 17 18

1 2 17 18

Release the Input 1 button and Output 1 button.

1

2 seconds

Ungrouped input and	1
output buttons light.

3.Select group 1: Press and release the Enter button.

Press and release the Enter button to select group 1.

The button lights to indicate the selection.

	C O N T R O L
ENTER	PRESET	VIEW	ESC
Group # 1	2	3	4

4.Assign inputs and outputs to group 1:

a.Press and release the Input 1 through 4 buttons.

One at a time, press and release the Input 1 through Input 4 buttons. The selected buttons light.

INPUTS

1 2 3 4 5 6 7 8 15 16

17 18 19 20 21 22 23 24 31 32

b.Press and release the Output 1 through 4 buttons.

One at a time, press and release the Output 1 through Output 4 buttons. The selected buttons light.

1 2 3 4 5 6 7 8 15 16

17 18 19 20 21 22 23 24 31 32

OUTPUTS

FOX Matrix 3200 and 7200 Switchers • Operation 35