Extron electronic 7200, 3200 manual Using the Help System, Emulate Mode Configuration

5.Select Fiber Matrix as the Matrix Model, 3200 or 7200 as the Default Size, and either singlemode or multimode for each board installed (see figure 49). Click OK.

Figure 49. Emulate Mode Configuration

6.Continue using the program as described in the Using the Matrix Switcher Control Software, steps 1 through 3, starting on page 73).

Using the Help System

For information about program features, you can access the help program in any of the following ways:

•From the Extron Electronics program folder or group, double-click the MATRIX Switcher Help icon (shown at right).

•From within the Matrix Switcher Control Program, click Help > Contents on the menu bar.

•From within the Matrix Switcher Control Program, press the <F1> key.

FOX Matrix 3200 and 7200 Switchers • Matrix Software 90