Extron electronic 3200, 7200 manual Physical Configuration Window

•Physical Switcher Layout — Calls the FOX Matrix Physical Configuration window (see figure 45), which displays the I/O board type installed in each slot. The Channels field can be helpful in identifying a specific input or output. In figure 45, for example, input 29 is identified as slot 4, input transceiver E (4o05).

Figure 45. Physical Configuration Window

•Name Presets — Allows you to name each of the 32 (FOX Matrix 3200) or 64 (FOX Matrix 7200) memory presets.

NOTE: Preset names are limited to 12 upper- and lower-case alphanumeric characters, space, and the _ and / characters. The HTML language reserves certain characters for specific functions (see Special Characters on page 70).

•Show RS-232 Strings — Displays the ASCII commands that are used by the current configuration. You can refer to these for SIS programming.

•I/O Group settings — Displays the inputs/outputs groups window, which allows you to assign inputs and outputs to any one of four groups (or no group).

•Room configuration — Allows you to assign outputs to rooms or delete outputs from rooms.

NOTE: A room is a subset of outputs that are logically related to each other, as determined by the operator. The FOX matrix switcher supports up to 10 rooms, each of which can consist of 1 to 16 outputs.

•Initialize — Initializes and clears any or all of the following: ties, presets, preset names, icon names, and icons.

FOX Matrix 3200 and 7200 Switchers • Matrix Software 87