Extron electronic 3200, 7200 manual Information requests

Command and Response Table for SIS Commands (continued)

Command Function SIS Command	Response	Additional description
(Host to Unit)	(Unit to Host)

Information requests

Information request I

Slot/plane/LC information	0*X1*I
Request part number	N
Request part number and	*N
board configuration

VX1%XX1^•AX1%XX1^•SX1&1X1&2...X1&n]

VX1%XX1^ shows the number of available inputs and outputs for this configuration.

AX1%XX1^ has no meaning for this product.

SX1&1X1&2...X1&n shows the board type installed in each slot.

n is either 4 or 9, depending on the model.

X1(1X1(2X1(3X1(4X1(5X1(6X1(7X1(8]

68-nnnn-nn] See www.extron.com, for part numbers.

68-nnnn-nn.X1&1X1&2X1&3 ... X1&n]

Part number (see below) plus I/O boards installed. n is either 4 or 9, depending on the model.

Read reclocker status X$= X%] Show current rate status for reclocker X$.

NOTE: The switcher automatically detects and reclocks the signal if the rate is 4.25 Gbps only. Other rates are ignored.

View SFP module status 40*X2)S X2!•X2@•X2#•X2$]

NOTE: There are up to three separate sets of Extron firmware on which the switcher can report: the controller firmware, which is the overall control firmware; the Ethernet protocol firmware, which handles the Ethernet interface; and the latest optional Extron firmware update, which is available at www.extron.com.

Query firmware version	Q	X2%]
Example:	Q	1.23]
Query controller firmware	0Q	X2%-X2^-X2^]
version (verbose)

The factory-installed controller firmware version is 1.23 (sample value only).

Provide a detailed status of the Ethernet protocol firmware, the controller firmware, and any firmware upgrade. The firmware that is running is marked by an asterisk (*). A caret (^) indicates that the firmware has a bad checksum or an invalid load. ?.?? indicates that firmware is not loaded.

Response description:	Ethernet protocol firmware version-controller firmware version-updated firmware version]
Example:	0q
Description	* indicates the version running	Upload date and time

1.23-1.00(1.68-FOMX Series -Wed, 20 Feb 2008 00:00:00 GMT)-1.00*(1.06-FOMX Series -Mon, 17 Mar 2007 16:39:21 GMT)

	Ethernet		Fiber Matrix firmware version			Updated firmware version
	protocol
	firmware
NOTE:		X1%	= Number (quantity) of inputs	8, 16, 24, 32, 40, 48, 56, 64, or 72
		X1^ = Number (quantity) of outputs		8, 16, 24, 32, 40, 48, 56, 64, or 72
		X1& = Board installed		0	= No board installed		4	= Non-pathological multimode board
				1	= Non-reclocking multimode board		5	= Non-pathological singlemode board
				2	= Non-reclocking singlemode board		6	= Pathological singlemode board
		X1*		3	= 3G, SDI, HD-SDI board		X = Unknown board or mix of transceivers
			= I/O board slot number	1 – 9 (FOX Matrix 7200) or 1 – 4 ( FOX Matrix 3200)
		X1( = Transceiver module installed		0	= No module installed
				1	= Non-pathological multimode module		3	= 3G-SDI, HD-SDI, SD-SDI module
		X2) = Transceiver module number		2	= Non-pathological singlemode module		4	= Pathological singlemode module
				01 – 72 (or maximum number of transceiver modules for your configuration)
		X2! = Vendor/manufacturer name
		X2@ = Transmit output power in milliwatts
		X2# = Receive optical power in milliwatts
		X2$ = SFP temperature		Degrees Celsius
		X2% = Firmware version number to second decimal place (x.xx)
		X2^ = Verbose firmware version-description-upload date/time. See above.
		X% = Output reclocking rate		00 = Bypass mode
				01 = Automatic mode (HDSDI boards only)			03 = 2.125 Gbps (laser boards only)
				02 = 1.250 Gbps (laser boards only)			04 = 4.250 Gbps (laser boards only)
		X$ = SFP or reclockable output number		00 – 32 or 72 (00 = global [SFP only])

FOX Matrix 3200 and 7200 Switchers • Programming Guide 65