Extron electronic 7200, 3200 manual List input link detection, Example 32 x 32 matrix LS

Command and Response Table for SIS Commands (continued)

Command Function SIS Command	Response	Additional description
(Host to Unit)	(Unit to Host)

View ties, mutes, and presets (continued)

View global preset configuration

Command description: Response description: Example (8 x 8 matrix):

EX&*X@*1VC}				X!n•X!n+1•...•X!n+15•Vid]									Show the configuration of preset X&. Show the
													input tied to 16 sequential outputs, starting
													from output X@.
preset # (X&)*starting output # (X@)*1VC}
input # (X!) tied to X@n•X! tied to X@n+1•X! tied to X@n+2• ... •X! tied to X@n+15•Vid]
E23*1*1VC}
		input 8 tied to output 4								outputs do not exist
input 2 tied to output 3							no tied input
Response = tied input: 08•08•02•08•08•01•00•00•--•--•--•--•--•--•--•--•Vid
Output:	1	2	3		4	5	6	7	8	09	10	11		12	13	14	15	16

Each position shown in the response is an output: left = starting output number (1 in this example), right

=starting output number + 15 (16 in this example). (Outputs 9 through 16 are not present on this matrix switcher.) The number in each position is the input tied to that output.

In this example, for preset 23, video input 8 is tied to outputs 1, 2, 4, and 5; input 2 is tied to output 3; and input 1 is tied to output 6. No inputs are tied to outputs 7 and 8.

NOTE:EX&*1*1VC} where X& = 0 returns the current configuration of the switcher.

View room preset	EX**X1)*X@*1VC}	X!n•X!n+1•...•X!n+15•Vid]	Show configuration of room X*, preset X1).
configuration			Show the input tied to up to 16 outputs
			assigned to room X*.
Command description:	room # (X*)*room preset # (X1))*starting output # (X@)*1VC
Response description:	input # (X!) tied to X@•X! tied to X@+1•X! tied to X@+2• ... •X! tied to X@+15•Vid]

List input link detection

NOTE: The switcher reports the link status for all outputs, up to the highest numbered output on the highest numbered slot with an I/O board installed. The switcher does not recognize gaps in the board installation. For example, if only two boards are installed, in slots 1 and 3, leaving slot 2 empty, the switcher returns link status for 24 sequential inputs. The input link response for the inputs supported by the board in slot 2, inputs 9 through 16, are all zeroes.

View all input connections 0LS

Example (32 x 32 matrix): LS

X1!1X1!2X1!3X1!4...X1!n]								Each X1! response is the connection status of
								an input, starting from input 1.
								n is the highest-numbered input.
no input detected			input detected
Response Status: 0 0 0 1 1 1 0. . .0
Input:	1	2	3	4	5	6	7		32

NOTE: X! = Input number (for tie)	00	– (maximum number of inputs for your configuration) (00 = untied)
X@ = Output number	01	– (maximum number of outputs for your configuration)
X& = Global preset number	00 – 32 (FOX Matrix 3200) or 64 (FOX Matrix 7200) (00 = current configuration for view only)
X* = Room number (for room presets)	01	– 10 maximum (each can have up to 10 presets (X1)) assigned)
X1) = Room preset number	01	– 10 maximum
X1! = Connection status	0 = no input connected		1 = input connected

FOX Matrix 3200 and 7200 Switchers • Programming Guide 62